Sable V6-183 3.0L DOHC VIN S MFI (1997)
Sun Visor: Service and Repair
Inside Visor
Removal
1.
LH inside visor and RH inside visor are attached to the vehicle over the windshield. Some vehicles have lighted inside visor vanities on both
the driver and the passenger side. Both inside visors and visor arm clips must be removed prior to root headlining removal.
2.
Using a small screwdriver, carefully pry oft cover to reveal mounting screws for LH inside visor and RH inside visor.
3.
Remove screws retaining LH inside visor or RH inside visor to root panel.
4.
Disengage LH inside visor or RH inside visor from visor arm clip.
5.
Lower LH inside visor or RH inside visor.
6.
Disconnect courtesy or interior lamp switch wiring, if equipped. Remove LH inside visor or RH inside visor.
Installation
1.
Follow removal procedure in reverse order.
