Sable V6-183 3.0L DOHC VIN S MFI (1997)
Six Way Seat Track Insulators
REMOVAL
1. Remove four front seat track to floor insulators to expose nuts and bolts.
2. Center power seat and move to full-up position.
3. Disconnect battery ground cable.
4. Remove nuts and bolts retaining the seat and track assembly to the front floor pan.
CAUTION: Use care when handling seat and track assembly. Dropping the assembly or sitting on seat not secured in vehicle may result in
damaged components.
5. Lift the seat and track assembly high enough to disconnect harness connectors. Remove seat and track assembly from vehicle.
6. Place seat upside down on a clean bench.
7. Remove front safety belt buckle end from front seat track.