Sable V6-183 3.0L DOHC VIN S MFI (1997)
Brake Pedal Assy: Testing and Inspection
Brake Pedal Reserve Check
Where a low brake pedal or the feel of a bottomed-out condition exists, check for brake pedal reserve.
1. Operate engine at idle with the transmission in either "PARK" or "NEUTRAL".
2. Depress brake pedal lightly three to four times.
3. Allow 15 seconds for vacuum to replenish power brake booster.
NOTE: This increased resistance may feel like something has bottomed out
4. Apply brake pedal until it stops moving downward or an increased resistance to the brake pedal travel occurs.
5. Hold brake pedal in applied position and raise the engine speed to approximately 2000 rpm.
NOTE: The additional movement of the brake pedal is the result of the increased engine manifold vacuum which exerts more force on the power
brake booster during engine rundown. This means that additional stroke is available in the brake master cylinder (2140) and the brake system is
not bottoming out as a customer may believe.
6. Release accelerator pedal and observe that brake pedal moves downward as engine returns to idle speed.
