mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Rear Cable and Conduit|Page 8874 > < Parking Brake Cable|Adjustments
Page 1
background image

Parking Brake Cable: Service and Repair
Rear Cable and Conduit

REMOVAL

1. Raise and support vehicle.

2. Loosen parking brake cable adjusting nut.

Park Brake Equalizer

3. Remove parking brake rear cable and conduit end fitting from parking brake cable equalizer.

4. Drum brakes:

-

Remove LH rear wheel and tire.

-

Remove brake drum assembly.

-

Disconnect parking brake rear cable and conduit from parking brake lever.

-

Using a 13 mm box-end wrench or screwdriver to press the conduit retaining prongs, remove cable-end pronged fitting from parking brake
support plate.

5. Disc brakes:

Rear Cable and Conduit|Page 8874 > < Parking Brake Cable|Adjustments