Sable V6-183 3.0L DOHC VIN S MFI (1997)
Parking Brake Control: Service and Repair
Park Brake Release Service
Park Brake Lever
REMOVAL
- Disconnect release cable from parking brake control release arm and remove release cable grommet from parking brake control.
- From under instrument panel, use a screwdriver to pry off and remove retainer clip securing cable and parking brake release handle to instrument
panel.
- Pull parking brake release handle and cable assembly out of instrument panel.
INSTALLATION
- Start cable and parking brake release handle assembly through locating hole in instrument panel
- Install retainer clip that secures parking brake release handle to instrument panel.
- Connect release cable to parking brake control release arm and install release cable grommet to parking brake control.
