Sable V6-183 3.0L DOHC VIN S MFI (1997)
Parking Brake Warning Switch: Service and Repair
Park Brake Cable To Lever
REMOVAL
-
Disconnect wire from switch.
-
Remove screw that retains switch assembly to parking brake control.
-
Remove switch from parking brake control.
INSTALLATION
-
Install switch to parking brake control.
-
Install screw that retains switch assembly to parking brake control.
-
Connect wire to switch.
CHECK OPERATION
-
Check to make sure parking brake warning lamp goes on prior to 50 mm (2.0 inches) of pedal travel and off when parking brake control is fully
released.