Sable V6-183 3.0L DOHC VIN S MFI (1997)
Wheel Speed Sensors, Rear (Part 1 Of 2)
Wheel Speed Sensors, Rear (Part 2 Of 2)
REMOVAL
1. Raise and support vehicle.
2. Disconnect rear brake anti-lock sensor from the mating body connector located under the vehicle in the center on No.4 crossmember as shown.
3. Disconnect routing clips from rear suspension arm and bushing and No.4 crossmember torque box.
4. Remove retaining bolt and rear brake anti-lock sensor.