Sable V6-183 3.0L DOHC VIN S MFI (1997)
Brake Switch (Cruise Control): Service and Repair
Deactivator Switch
REMOVAL
1. Locate and disconnect electrical connector for speed control deactivate switch at pedal support bracket. Slide connector end up and remove from
positioner.
2. Push end of deactivate switch plunger up off plastic stem.
3. Squeeze locking tabs of speed control deactivate switch together and push through mounting hole in pedal support bracket. Remove deactivate
switch.
INSTALLATION
1. Follow Removal procedure in reverse order and adjust.
