mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Air Door Actuator|Page 10919 > < A/C - Lack Of Temperature Control|Page 10916
Page 1
background image

Air Door Actuator / Motor: Description and Operation
Air Door Actuator

With Electronic Automatic Temperature Control

The vacuum control motors :

^

are located on the A/C evaporator housing, A/C recirculation air duct and heater air plenum chamber.

^

direct system airflow to the vehicle interior as determined by the remote climate control module or manual override.

^

The five-passenger seating configuration has an additional vacuum control motor mounted on the heater air plenum chamber to control airflow to
the rear seat A/C register.

With Manual A/C-Heater

VACUUM CONTROL MOTORS

The vacuum control motors direct system airflow to the different outlets. There are two types of vacuum control motors used in the System:

^

single-diaphragm for air inlet and windshield defroster door operation

^

double-diaphragm for air damper door operation Single-diaphragm motors have two positions:

^

shaft extended with no vacuum applied

^

shaft retracted with vacuum applied

Double-diaphragm motors have three positions:

^

shaft fully extended with no vacuum applied to either port

^

shaft halfway extended with vacuum applied to only one port

^

shaft fully retracted with vacuum applied to both ports

Air Door Actuator|Page 10919 > < A/C - Lack Of Temperature Control|Page 10916