Sable V6-183 3.0L DOHC VIN S MFI (1997)
REMOVAL
1. Remove integrated panel.
2. Open glove compartment, press sides inward and lower glove compartment to floor.
3. Remove two screws retaining remote climate control module to A/C evaporator housing.
4. Disconnect wiring connector and vacuum hose harness from remote climate control module and remove module from vehicle.
INSTALLATION
1. Position remote climate control module near A/C electronic blend door actuator. Connect wiring connector and vacuum hose harness to remote
climate control module.
2. Install remote climate control module to A/C evaporator housing with two retaining screws.
3. Install integrated control panel.