Sable V6-183 3.0L DOHC VIN S MFI (1997)
13.
Gradually bring the engine up to 1200 rpm by running it at lower rpms for short periods (first at 800 rpm, then at 1000 rpm). Set the engine at
1200 rpm and run it for an hour with the A/C system operating.
14.
Stop the engine.
NOTE:
IT WILL BE NECESSARY TO RECOVER THE SYSTEM REFRIGERANT CHARGE BEFORE PROCEEDING.
15.
Allow the engine to cool sufficiently to remove the fittings, flexible hoses and pancake filter from the liquid line.
16.
Discard the filter. It can be used one (1) tie only.
17.
Reconnect the liquid line back into the system.
18.
Evacuate, charge and leak test the system. Make any necessary adjustments.
19.
Check the operation of the system in all models.
PART NUMBER
PART NAME
F8VZ-19E773-AA
Filter Kit
F73Z-19577-AA
Refrigerant Oil - Motorcraft YN-9-A
(For R-12 Refrigerant Systems Only)
F7AZ-19589-DA
Refrigerant Oil - Motorcraft YN-12-C
(PAG-Type Oil For R-134a Refrigerant
Systems Only)
NOTE
THE TOTAL REPAIR TIME IS FOR INSTALLING SERVICE FILTER KIT PER INSTRUCTIONS THIS INCLUDES INSTALLATION OF
AND DISCARD OF FILTER. REFER TO SERVICE LABOR TIME STANDARDS MANUALS IF ADDITIONAL LABOR OPERATIONS ARE
REQUIRED.
