Sable V6-183 3.0L DOHC VIN S MFI (1997)
7. Remove screw retaining A/C vacuum reservoir tank and bracket and slide reservoir down to release hook.
8. Disconnect vacuum hose from back of A/C vacuum reservoir tank and bracket and remove from vehicle.
INSTALLATION
1. Install vacuum hose on nipple on back of A/C vacuum reservoir tank and bracket.
2. Install A/C vacuum reservoir tank and bracket with retaining screw tightened to 7.2-10.8 N.m (64-95 lb-in).
3. Install rear half of front fender splash shield with four screws and three push pins. Tighten screws to 0.6-1.0 N.m (6-8 lb-in).
4. Install RH front wheel and tire assembly. Tighten lug nuts to 115-142N.m (85-104lb-ft).
5. Lower vehicle.
