Sable V6-183 3.0L DOHC VIN S MFI (1997)
36.
Fill fuel tank.
37.
Connect battery negative cable, then remove memory saver.
38.
Start and run engine.
39.
Raise vehicle.
40.
Inspect fuel system for leaks.
41.
Lower vehicle.
Mustang
1.
Install memory saver, then disconnect battery negative cable.
2.
Remove fuel system pressure as follows:
^
Remove schrader valve cap and attach EFI/CFI fuel pressure gauge.
^
Slowly open manual valve on fuel pressure gauge to relieve fuel system pressure.
3.
Completely drain fuel tank. It may be necessary to disconnect fuel filler hose to drain fuel tank.
4.
Remove fuel filler pipe retainers from gas cap side of fuel filler pipe.
5.
Raise and support vehicle.
6.
Remove screw retaining fuel filler pipe retainer to fuel tank flange.Refer to Figure 10.
7.
Remove fuel filler pipe rubber weather boot from inner fender well. See Figure 10.
8.
Support fuel tank with adjustable jack.
