Sable V6-183 3.0L DOHC VIN S MFI (1997)
36.
Start and run engine.
37.
Raise vehicle.
38.
Inspect fuel system for leaks.
39.
Lower vehicle.
Windstar
1.
Install memory saver, then disconnect battery negative cable.
2.
Remove fuel system pressure as follows:
^
Remove schrader valve cap and attach EFI/CFI fuel pressure gauge.
^
Slowly open manual valve on fuel pressure gauge to relieve fuel system pressure.
3.
Completely drain fuel tank. It may be necessary to disconnect fuel filler hose to drain fuel tank.
4.
Raise and support vehicle.
5.
Support fuel tank with adjustable jack.
6.
Disconnect fuel filler and vent hoses from fuel tank.
7.
Disconnect fuel supply, return and vapor lines. See Figure 20.
