Sable V6-183 3.0L DOHC VIN S MFI (1997)
Headlamp Switch: Service and Repair
Headlamp Switch
REMOVAL
1. Pry headlamp switch housing from instrument panel.
2. Depress release button on headlamp switch and pull away from instrument panel.
3. Disconnect wire connectors from headlamp switch and remove from vehicle.
NOTE: If vehicle is equipped with autolamps there will be three wire connectors on headlamp switch; if not equipped with autolamps there will
only be two wire connectors.
INSTALLATION
1. Follow removal procedure in reverse order.
