Sable V6-183 3.0L DOHC VIN S MFI (1997)
Alignment: Specifications
Alignment
Front
Front
Nominal
Minimum
Maximum
Caster
+ 3.8 deg
+ 2.8 deg
+ 4.8 deg
Note: Caster measurements must be made on the LH side by
turning left wheel through the prescribed angle of sweep
and on the RH side by turning the right wheel through the
prescribed angle of sweep for the equipment being used.
When using alignment equipment designed to measure caster
on both the RH and LH side, turning only one wheel will
result in a significant error in caster angle for the other
wheel.
Caster Difference Side to Side
0 deg
- 0.85 deg
+ 0.85 deg
Note: (Left minus right).
Camber
- 0.5 deg
- 1.1 deg
+ 0.1 deg
Camber Difference Side to Side
0 deg
- 0.70 deg
+ 0.70 deg
Note: (Left minus right).
Total Toe
- 0.100 in
- 0.225 in
+ 0.25 in
Note: (Left plus right).
- 0.200 deg
- 0.450 deg
+ 0.05 deg
Clear Vision
- 0.6 deg
- 3.6 deg
+ 2.4 deg
Note: Steering wheel angle - negative is ccw.
Front Wheel Turning Angle
18.25 deg
---
---
Note: Left and right wheels. Turning angle at outside wheel
with inside wheel turned 20 degrees.
Rear
Rear
Nominal
Minimum
Maximum
Camber
- 0.60 deg
- 1.30 deg
- 0.10 deg
Note: Camber is factory-set and cannot be adjusted.
Camber Difference Side to Side
0 deg
- 1.20 deg
+ 1.20 deg
Note: (Left minus right) Camber is factory-set and cannot
be adjusted.
Toe
+ 0.030 in
- 0.095 in
+ 0.155 in
Note: (Individual sides)
+ 0.06 deg - 0.19 deg
+ 0.31 deg
Total Toe
+ 0.060 in
- 0.060 in
+ 0.185 in
Note: (Left plus right)
+ 0.12 deg - 0.13 deg
+ 0.37 deg
