mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Drive Belt|Inspection|Page 2048 > < Drive Belt|Inspection
Page 1
background image

Drive Belt: Testing and Inspection
Cracking/Chunking/Wear

CRACKING 

Under severe operating conditions (high temperatures, low humidity), drive belt rib cracking can occur at less than 48,000 km (30,000 miles).
Drive belt rib cracking is not a reason for concern and has no detrimental effect on drive belt performance. The drive belt is still perfectly
functional until rib "chunking" occurs.

CHUNKING 

Drive belt "chunking" is where the rubber material actually falls out between the cracks. The drive belt should be replaced if chunking occurs.

WEAR 

Wear includes conditions such as fraying, glazing, etc. Fraying gives the belt a tattered look. Glazing will make the belt shiny. Determine what
type of wear is evident and proceed to symptom chart.

Drive Belt|Inspection|Page 2048 > < Drive Belt|Inspection