Sable V6-183 3.0L DOHC VIN S MFI (1997)
Fluid - A/T: Testing and Inspection
Fluid Condition Check
1. Make the normal fluid level check. See: Fluid Level Check
2. Observe the color and odor of the fluid. It should be red, not brown or black. The odor may indicate an overheating condition or a clutch disc or
band failure.
3. Use a clean lint-free cloth and wipe the fluid level indicator. Examine the stain for evidence of solid particles and for engine coolant signs (gum or
varnish on the fluid level indicator).
4. If particles are present in the fluid or there is evidence of engine coolant or wafer, the transaxle must be removed for further inspection.
5. If fluid contamination or transaxle failure is confirmed by further evidence of coolant or excessive particles in the transaxle pan, the transaxle must
be disassembled and completely cleaned and serviced. This includes cleaning and flushing the torque converter and transaxle cooling system.
6. During disassembly and assembly, all overhaul checks and adjustments of clearances and end play must be made. After the transaxle has been
serviced, all diagnostic tests and adjustments listed in the diagnostic charts must be completed to make sure that the problem has been corrected.
