Sable V6-183 3.0L DOHC VIN S MFI (1997)
9.
Slide the new power steering pressure line on top of bell housing inboard of the transmission dip stick.
10.
Raise the vehicle and lower the rear of the subframe.
11.
Disconnect the old power steering line from the gear end and remove line.
12.
Install quick - connect fitting into gear.
13.
Install the new power steering pressure line at gear end.
14.
Return the subframe to its original position and torque bolts to 88-118 Nm (65-87 lb-ft).
15.
Lower the vehicle.
