Sable V6-183 3.0L DOHC VIN S MFI (1997)
EGR Backpressure Transducer: Service and Repair
EGR Backpressure Transducer
REMOVAL and INSTALLATION
1. Disconnect engine control sensor wiring from EGR backpressure transducer.
2. Disconnect EGR backpressure transducer hoses from EGR valve to exhaust manifold tube.
3. Remove retaining nuts or bolts (depending upon application) and EGR backpressure transducer.
4. To install, reverse Removal procedure. Tighten retaining nuts or bolts (depending upon application) to 5-7 Nm (45-61 lb in).
