Sable V6-183 3.0L DOHC VIN S MFI (1997)
8. Inspect fuel injector end cap and body for signs of dirt and deterioration and replace as required.
INSTALLATION
1. Lubricate two new O-rings lightly with clean engine oil meeting Ford specification WSS-M2C153-F.
CAUTION: Never use silicone grease on fuel injector O-rings. It will clog the injectors.
2. Lightly push and twist fuel injectors into fuel injection supply manifold.
3. Install fuel injection supply manifold with fuel injectors as described.
4. Install upper intake manifold as described.
5. Perform Post-Service Procedures. See: Service and Repair/Post-Service Procedures
