mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Torque Converter Clutch Solenoid, A/T|Specifications > < Diagram Information and Instructions|Page 6677
Page 1
background image

Torque Converter Clutch Solenoid: Technical Service Bulletins
A/T - AX4N Incorrect Resistance Specification

Article No. 
97-13-12

06/23/97

TRANSAXLE - AX4N - INCORRECT RESISTANCE 
SPECIFICATIONS - SERVICE TIP

FORD: 
1997 TAURUS

LINCOLN-MERCURY: 
1997 SABLE

ISSUE: 

The 1997 AX4N transaxle uses two different Torque Converter Clutch (TCC) Solenoids. The difference between the two are resistance specifications.
The Taurus/Sable uses a low resistance and the Continental uses a high resistance TCC solenoid.

ACTION: 

To diagnose a TCC solenoid in a 1997 Taurus/Sable vehicle, refer to the Resistance Chart above for the correct resistance values while following
Pinpoint Test C1 on Page 07-01B-80 of the 1997 Taurus/Sable Service Manual. The resistance listed in the Pinpoint Test is correct. The resistance listed
in the Solenoid Resistance Chart in the Service Manual is incorrect.

OTHER APPLICABLE ARTICLES: NONE

WARRANTY STATUS: INFORMATION ONLY

OASIS CODES: 501000, 502000, 503000, 504000, 590000

Torque Converter Clutch Solenoid, A/T|Specifications > < Diagram Information and Instructions|Page 6677