Sable V6-183 3.0L DOHC VIN S MFI (1997)
5. Install anti-lock pump motor ground strap to frame rail. Tighten screw to 8-10 Nm (71-88 inch lbs.).
6. Connect four tubes to outlet ports on side of anti-lock brake hydraulic control unit and two tubes to inlet ports of anti-lock brake hydraulic control
unit and tighten tube nuts to 14-24 Nm (11-17 ft.lbs).
7. Connect connector to anti-lock brake control module. Tighten connector retaining bolt to 4.8 Nm (42 inch lbs.).
8. Install mounting bracket and battery tray.
9. Install battery and connect cables.
10. Bleed anti-lock brake control module. See: Brakes and Traction Control/Brake Bleeding/Service and Repair/With ABS
