Sable V6-183 3.0L DOHC VIN S MFI (1997)
Lamp Out Module: Service and Repair
REMOVAL
1. Open luggage compartment door.
2. Pull RH luggage compartment trim panel out towards center of vehicle to reveal lamp out control module in RH rear inner fender.
3. Remove two screws retaining lamp out control module to body.
4. Disconnect harness connector from lamp out control module and remove control module from vehicle.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten retaining screws to 1.6-2.2 Nm (15-19 Lb-In).
