Sable V6-183 3.0L DOHC VIN S MFI (1997)
1. To install, reverse removal procedure. Be sure to position belts as shown.
2. Tighten all retaining bolts to 34-46 Nm (25-33 lb ft). Cycle system several times to make sure of proper operation of front safety belt retractor and
tongue. Make sure the belt is not twisted.
3. For front passenger and all rear positions (except auxiliary seat), fully extract the webbing to make sure the automatic locking retractor mode is
operational. Verify the retractor automatically switches to emergency locking retractor mode once the webbing is fully retracted.
Sedan