mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Campaign - Fuel Gauge/Sender Assembly|Page 818 > < Campaign - Fuel Gauge/Sender Assembly|Page 816
Page 7
background image

11.

Disconnect fuel pump electrical connector, located between the side of the fuel tank and the frame rail. See Figure 3.

12.

Slightly lower fuel tank again.

13.

Disconnect front EVAP hose from top of fuel tank.

14.

Remove fuel tank from vehicle.

Campaign - Fuel Gauge/Sender Assembly|Page 818 > < Campaign - Fuel Gauge/Sender Assembly|Page 816