Sable V6-183 3.0L DOHC VIN S MFI (1997)
2. Align multi-function switch mounting holes with corresponding holes in the steering column tube casting. Install two self-tapping TORX screws
making sure to start the TORX screws in the previously tapped holes. Tighten to 2-3 Nm (18-26 inch lbs.).
3. Install upper steering column shroud and lower steering column shroud with screws.
4. Install ignition switch lock cylinder.
5. Install key release lever.
6. Connect battery ground cable.
7. Check steering column tube and multi-function switch for proper operation.
