Sable V6-183 3.0L DOHC VIN S MFI (1997)
Inertia Fuel Shutoff Switch: Service and Repair
Wagon
REMOVAL
1. Open liftgate.
2. Remove right rear quarter trim panel.
3. Disconnect wiring harness connector and remove two screws retaining Inertia Fuel Shutoff (IFS) switch to inner fender.
4. Remove IFS switch from vehicle.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten screws to 1.6-2.2 Nm (15-19 lb in).
