Sable V6-183 3.0L DOHC VIN S MFI (1997)
Overdrive Switch: Service and Repair
REMOVAL
1. Disconnect battery ground cable.
2. Carefully remove transmission control switch button from transaxle range selector lever knob.
3. Remove transmission control switch contact from inside transaxle range selector lever knob.
INSTALLATION
1. To install, reverse Removal procedure noting the following:
a. Make sure the transmission control switch contact is installed in the transaxle range selector lever knob with the convex side of the contact
facing outward toward the transmission control switch button.
b. Check transmission control switch for proper operation. "O/D OFF" indicator on instrument cluster should indicate switch function.
