Sable V6-183 3.0L DOHC VIN S MFI (1997)
Starter Bearing: Service and Repair
DISASSEMBLY
1. Press or tap the bushings out of their housing using a driver of the appropriate size. Be sure the housing is well supported.
ASSEMBLY
1. Immerse new bushings in clean engine oil meeting Ford specification WSS-M2C153-F for at least 20 minutes before installation.
2. Press or tap the new bushing into position using a driver.
NOTE: Do not ream the bushings after installation since the self-lubricating qualities of the bushing may be damaged.
