Sable V6-183 3.0L DOHC VIN S MFI (1997)
Part 2 Of 2
7. Disconnect power steering return hose from power steering rack fitting.
8. Remove retaining bolts from return line mounting brackets at LH rear, middle and front of front sub-frame.
9. Disconnect power steering return hose from LH side of power steering fluid cooler and remove power steering fluid cooler from underneath
vehicle.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Install new O-rings on power steering return hose.
3. Fill and bleed power steering system with Motorcraft MERCON Multi-Purpose (ATF) Transmission Fluid XT-2-QDX or equivalent meeting Ford
MERCON specification. Check system for leaks and proper operation.
