Sable V6-183 3.0L DOHC VIN S MFI (1997)
9. Remove stabilizer bar link nut, and remove stabilizer bar link from front shock absorber.
CAUTION: Use extreme care not to damage boot seal. Do not use power tools to remove the nut or bearing and seal damage will result. Loosen
the nut first, then remove nut from stud using the hex hold feature.
10. Using Rotunda Spring Compressor 164-R3571 or equivalent, compress front coil spring until lower ball joint clears front suspension lower arm.
11. Remove and discard front wheel knuckle-to-shock absorber pinch bolt and nut. (A drift punch may be used to remove bolt.)
