Sable V6-183 3.0L DOHC VIN S MFI (1997)
12. Install wheel and tire assembly and lower vehicle. Tighten lug nuts to 115-142 Nm (85-104 ft. lbs.).
Wagon
REMOVAL
1. Raise vehicle on a hoist.
2. Remove tire and wheel assembly.
3. Position a jackstand under rear suspension arm and bushing. Lower hoist slightly to put suspension at normal position.
CAUTION: The lower rear suspension arm and bushing must be supported before removal of upper or lower shock absorber attachments to
prevent damage to attached components.
4. From inside of vehicle, remove rear compartment access panels.