Sable V6-183 3.0L DOHC VIN S MFI (1997)
3.
Grip each front tire at the top and bottom and move the wheel inward and outward while lifting the weight of the tire off the front wheel bearing.
4.
If the tire and wheel (hub) is loose on the spindle, does not rotate freely, or has a rough feeling when spun, carry out one of the following:
^
On vehicles with inner and outer bearings, Inspect the bearings and cups for wear or damage. Adjust or install new bearings and cups as
necessary.
^
On vehicles with one sealed bearing, install a new wheel hub. Refer to the appropriate workshop manual for the service procedures.
