Sable V6-183 3.0L DOHC VIN S MFI (1997)
Channel Plate: Service and Repair
DISASSEMBLY
1. Remove five Teflon seal rings and No.5 thrust washer. Discard seal rings.
2. Clamp driven sprocket support vertically in a soft-jawed vise.
3. Remove driven sprocket bearing if necessary using Bearing Remover T94P-77001-KH and Impact Slide Hammer T50T-100-A.
ASSEMBLY
1. If removed, press driven sprocket bearing using an Arbor Press, Stator and Driven Sprocket Bearing Replacer T86P-70043-B, and Driver Handle
T80T-4000-W.
