mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

A/T - AX4N No 4th Gear/DTC's P0734/P0761/648 Set|Page 7061 > < Channel Plate, A/T|Service and Repair|Page 7052
Page 1
background image

Clutch: All Technical Service Bulletins
A/T - AX4N No 4th Gear/DTC's P0734/P0761/648 Set

Article No.
98-10-7

05/26/98

^

TRANSAXLE - AX4N - NO 4TH GEAR AND 
DIAGNOSTIC TROUBLE CODES (DTCS) P0734 
AND/OR P0761 FOR 1996-98 TAURUS/SABLE AND 
1995-98 CONTINENTAL, AND DTC 648 FOR 1994-95 
TAURUS/SABLE

^

TRANSAXLE - AX4N - RETAINING CLIP FOR
FORWARD CLUTCH CONTROL VALVE - SERVICE
TIP

FORD:
1994-98 TAURUS

LINCOLN-MERCURY:
1994-98 SABLE
1995-98 CONTINENTAL

ISSUE

No 4th gear operation (no 3-4 shift) and Diagnostic Trouble Codes (DTCs) P0734 and/or P0761 or 648 may occur on some vehicles. This may be caused
by a broken retaining clip in the valve body that secures the forward clutch control valve and spring in place.

ACTION

Replace broken forward clutch control valve retaining clip with revised forward clutch control valve retaining clip. Refer to the following Service
Procedure for details.

SERVICE PROCEDURE

1.

Inspect for a broken retaining clip by removing the valve body and then the valve body separator plate. Inspect the forward clutch control valve,
spring, retaining clip, and valve body casting for damage (Figure 1).

A/T - AX4N No 4th Gear/DTC's P0734/P0761/648 Set|Page 7061 > < Channel Plate, A/T|Service and Repair|Page 7052