Sable V6-183 3.0L DOHC VIN S MFI (1997)
2. If removed, install two differential side gear thrust washers, differential side gears, output shaft and retaining ring. Walk differential pinion gears
and differential side gear thrust washers into position by rotating output shaft.
3. Tap differential pinion shaft through differential case, differential side gear thrust washers and differential side gears using a soft mallet. Make sure
to align retaining pin hole in differential pinion shaft with hole in differential case.
4. Install new pinion shaft roll pin using a drift. Install pin so it is flush with differential housing.
