Sable V6-183 3.0L DOHC VIN S MFI (1997)
4. Install two new filter screens into main control valve body assembly.
5. Install valve body separator plate with bonded gasket.
CAUTION: Verify relief and check valves for proper alignment to separator plate before tightening bolts. If relief and check valves are
improperly installed, the transaxle will not operate properly.
NOTE: Gaskets are bonded to the separator plate.
6. Install two T-30 Torx bolts and tighten to 9-12 Nm (80-106 in lbs).