Sable V6-183 3.0L DOHC VIN S MFI (1997)
Valve Body: Service and Repair
Disassembly
DISASSEMBLY
1. Remove two bolts retaining pump to main control valve body.
2. Remove pump from main control valve body.
3. Place main control valve body on bench with valve body separator plate up, and remove two T-30 Torx bolts retaining valve body separator plate
to main control valve body.
CAUTION: Do not damage gasket.
NOTE: Main control valve body separator plate and main control valve body separator plate gasket are bonded together. This separator plate and
its gaskets are serviced as an assembly.