Sable V6-183 3.0L DOHC VIN S MFI (1997)
Window Track: Service and Repair
Rear
REMOVAL
1. Remove rear door trim panel and watershield.
CAUTION: Removal of the rear door glass run is recommended only if damage to the rear door glass run occurs. Due to the fragile make-up of
the component, unnecessary removal may cause damage and/or breaks in the plastic pin track insert within the B- and C-pillar sections of the rear
door glass run.
2. Lower window glass all the way.
3. Remove rear door glass outside weatherstrip by removing nut and disengaging clips.
NOTE: Outside belt weatherstrip plastic clips may break during removal.
4. Remove window garnish moulding.
5. Remove rear door glass inside weatherstrip by gently pulling from rear door flange.
6. Remove two rear door window stabilizer retaining screws, washer and rear door window stabilizer.
7. Remove rear door window glass.
8. Remove bolt retaining rear door glass run to inner door.
