Sable V6-183 3.0L DOHC VIN S MFI (1997)
Windshield: Service and Repair
Removal
WARNING: SAFETY GLASSES AND GLOVES MUST BE WORN. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY.
Remove windshield wiper arms and blades.
1.
Remove visors and drop headliner near windshield opening down to avoid cutting headliner during windshield glass removal. Place a small
block of suitable material between headliner and roof to act as a spacer. Remove interior garnish mouldings as required.
2.
Remove cowl vent screen.
3.
Remove inside rear view mirror.
4.
CAUTION: Use care to avoid damage to the instrument panel.
Use Rotunda Knife with Offset Blade 107-R1511 Rotunda Interior Auto-Glass Cut-Out knife kit 164-R2450 or equivalent to cut adhesive.
Refer to manufacturer's instructions when using tool.
5.
Remove windshield glass and moulding assemblies from vehicle using Glass Holding Tool D81T-33610-H or equivalent.
6.
Trim remaining urethane on pinch weld to within 1 to 1.5 mm (0.04 to 0.06 inch) thickness with utility knife or razor blade. When completed,
surface should be smooth and free of cuts and contamination.
7.
Check pinch weld sealing area for damaged sheet metal, rust or foreign objects which may have caused, or may cause, glass breakage. Service
metal if necessary.
