Sable V6-183 3.0L DOHC VIN S MFI (1997)
Windshield Washer Pump: Service and Repair
Front Washer Pump and Reservoir
REMOVAL
1. Remove radiator coolant recovery reservoir.
2. Disconnect wiring connector from windshield washer reservoir.
3. Remove two nuts near suction accumulator/drier retaining windshield washer reservoir to body.
4. Raise vehicle on hoist.
5. Working through RH front wheel opening, remove front half of front fender splash shield.
6. Remove screw retaining windshield washer reservoir to inner fender.
7. Disconnect windshield washer hose connectors.
8. Disconnect windshield washer hose.
NOTE: Windshield washer reservoir will drain with window washer hose disconnected.
