Sable V6-183 3.0L DOHC VIN S MFI (1997)
Windshield Washer Spray Nozzle: Service and Repair
Rear Nozzle Jet and Bracket
REMOVAL
1. Disconnect window washer hose from nozzle by pulling away from inside of liftgate.
2. Remove nut retaining windshield washer nozzle jet and bracket to back window glass.
3. From outside vehicle, remove windshield washer nozzle jet and bracket.
INSTALLATION
1. Install windshield washer nozzle jet and bracket to back window glass.
2. From passenger compartment, install nut retaining windshield washer nozzle jet and bracket. Tighten to 2-3 Nm (18-27 Lb-In).
3. Install window washer hose to windshield washer nozzle jet and bracket.
