Sable V6-183 3.0L VIN U FI (1998)
8. Disconnect vacuum hose from back of A/C vacuum reservoir tank and bracket and remove from vehicle.
INSTALLATION
1. Install vacuum hose on nipple on back of A/C vacuum reservoir tank and bracket.
2. Install A/C vacuum reservoir tank and bracket. Tighten retaining screw to 7.2-10.8 N.m (64-95 Lb-In).
3. Install rear half of front fender splash shield with four screws and three push pins. Tighten screws to 0.6-1.0 N.m (6-8 Lb-In).
4. Install RH front wheel and tire assembly. Tighten lug nuts to 115-142 N.m (85-104 Lb-Ft).
5. Lower vehicle.
