Sable V6-183 3.0L VIN U FI (1998)
AX4S Check Balls: Pump Assembly Housing - Check Balls, Oil pump body
13. Install four check balls and one relief valve.
Valve Body Guide Pins And Bolts
14. Position valve body separator plate with bonded gasket on pump housing. Insert Valve Body Guide Pin Set 307-S165 (T86P-70100-A) and Valve
Body Guide Pin 307-166 (T86P-70100-13). Then, install two Torx bolts. Tighten bolts to 9-12 Nm (80-106 in lb). Remove guide pins.
15. Position main control valve body on pump.
Valve Body Guide Pins
16. Insert Pump Body Guide Pins 307-169 (T86P-70370-A) and Valve Body Guide Pin 307-167 (T86P-70100-C), as shown. Install two valve
body-to-pump retaining bolts and tighten to 9-12 Nm (80-106 in lb). Remove guide pins.