Sable V6-232 3.8L (1988)
Horn Switch: Technical Service Bulletins
Horn Pad/Speed Control - Harness Adaptor Kit
Article No. 88-26-4
WIRING - HORN PAD AND SPEED CONTROL SWITCH WIRE HARNESS - NEW ADAPTOR KIT
LINCOLN-MERCURY: 1988 SABLE
ISSUE:
A horn pad with speed control switches or a speed control switch that does not mate to the steering wheel wire harness connector may be
caused by a change in the type of connector used in production. The production change involved a new design wire harness connector on the
vehicle steering wheel harness and the speed control switches.
FIGURE 5
ACTION:
If service is required and the connectors do not match, install a service steering wheel wire harness adaptor to speed control switch kit
(E84Y-9D821-A). This kit contains two steering wheel wire harnesses. One harness with a white connector and one harness with a grey
connector. Refer to Figure 5 to determine which wire harness is required.
PART NUMBER
PART NAME
CLASS
E84Y-9D821-A
Wire Harness Adaptor Kit
C
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS:
"INFORMATION ONLY"
OASIS CODES:
2770, 2900
