Sable V6-3.0L DOHC VIN S (2002)
![background image](/mercury/sable/v6-3.0l_dohc_vin_s/Page-2556001.png)
Rear Bumper Reinforcement: Service and Repair
REAR BUMPER
Special Tool(s)
Special Tool(s)
Removal and Installation
1. Remove the rear bumper cover.
2. Remove the rivets and the rear bumper isolator.
3. Remove the bolts and the rear bumper.
4. NOTE: When installing the bumper isolator, the special tool must be used to install the new rivets.
To install, reverse the removal procedure.