Sable V6-3.0L DOHC VIN S (2002)
Radiator Hose: Service and Repair
Radiator Hose-Tube Assembly
Removal and Installation
1. Raise and support vehicle.
2. Remove the front splash shield.
3. Drain the cooling system.
4. Remove the lower radiator hose, reservoir supply hose, and the radiator lower tube bolt.
5. Lower the vehicle.
6. Remove the radiator upper tube bolt, and disconnect the radiator vent tube.
7. Disconnect the upper radiator hose and engine vent hose.
8. Release the tabs on the power distribution box and position aside.