Sable V6-3.0L DOHC VIN S (2002)
1. Install a new gasket into the Y-pipe flange. Install the three-way catalytic converter studs into the Y-pipe flange and tighten the nuts.
-
Support with a suitable jack stand.
2. Connect the muffler to the three-way catalytic converter and install the insulators.
-
Remove the jack stand.
3. Install the exhaust clamp and tighten the nuts.
4. Install the left rear suspension control arm(s).
-
Check and, if necessary, adjust the alignment.
5. Lower the vehicle.