Sable V6-3.0L DOHC VIN S (2002)
Air Door Actuator / Motor: Service and Repair
Vacuum Control Motor
Air Inlet Door
REMOVAL
1. Remove the evaporator and heater core housing.
2. Remove the screws.
3. Rotate and remove the air inlet door vacuum control motor.
CAUTION: Do not attempt to bend any part of the recirculation air duct door lever.
INSTALLATION
1. To install, reverse the removal procedure.
Panel/Floor Door
REMOVAL
1. Working through the driver footwell, remove the two screws and the shield.
NOTE: The heater core and evaporator core housing is shown removed from the vehicle for clarity.
